Enterprise Infrastructure

Enterprise Infrastructure

CCNA Enterprise Infrastructure

Autonomous System Numbers – BGP

There are two types of BGP Autonomous system numbers: Private and Public. Various routing protocols use Autonomous System (AS) Numbers. IANA allocates AS Numbers to Regional Internet Registries ...
Read more 0
Enterprise Infrastructure

EIGRP Configuration

Enhaced Interior Gateway Routing Protocol – EIGRP Its internal administrative distance is 90, and the external one is 170. So that a router configured with EIGRP can exchange ...
Read more 0
Enterprise Infrastructure

Switched Port Analyzer (SPAN and RSPAN)

SPAN (Switched Port Analyzer) is a feature that allows copying traffic from a source port or switch vlan to a destination port. In this article, we will discuss: ...
Read more 0
Enterprise Infrastructure

Configure AAA Switch Cisco IOS

AAA – Authentication, Authorization, AccountingAuthentication: Who is the user?Authorization: What can the user do?Accounting: What did the user do? Cisco switches use two protocols for communication with AAA ...
Read more 0
Enterprise Infrastructure

Configuring Port Security in Cisco Switch IOS

This feature controls the number of MAC addresses per port.The maximum number of MAC addresses per port can be configured (default is 1).The MAC addresses can be configured ...
Read more 0
Enterprise Infrastructure

Configure Storm Control in Cisco IOS

Storm control is a feature used to remedy broadcast, multicast, and unicast unknown overruns in the LAN network. Thresholds are configured, and action is taken if these thresholds ...
Read more 0
Enterprise Infrastructure

Configuring SNMP on Cisco IOS

Simple Network Management Protocol (SNMP) Configuring SNMPv2C  The following commands are used to configure SNMPv2C: Switch(config)# snmp-server host host-address [ informs] version 2c community-string Switch(config)# snmp-server community string ...
Read more 0
Enterprise Infrastructure

Configuring NTP on Cisco IOS

Network Time Protocol (NTP) is used for centralized synchronization of the date and time of devices. It works over UDP port 123.  NTP operation modes: Server: the device ...
Read more 0
Enterprise Infrastructure

Cisco IOS commands

Commands Used to Monitor and Manipulate the CAM Table TaskDisplay all MAC addresses learned on a specific interfaceSwitch# show mac address-table dynamic interface type number Display the current ...
Read more 0
Enterprise Infrastructure

Configure Syslog on Cisco IOS

Syslog is a standard for logging messages describing important events on network equipment. These events are used for auditing to know what, when, and how the event happened. ...
Read more 0
Enterprise Infrastructure

Configure DHCP in router cisco

DHCP (Dynamic Host Configuration Protocol)  The DHCP protocol allows clients to dynamically configure network parameters without the need for a manual configuration process.  Dynamically assigns an IP address to ...
Read more 0
Enterprise Infrastructure

EIGRP

EIGRP (Enhanced Interior Gateway Routing Protocol) is an advanced vector distance protocol, an enhanced version by Cisco’s proprietary Interior Gateway Routing Protocol (IGRP). EIGRP uses the same algorithm ...
Read more 0
Enterprise Infrastructure

STP: Multiple Spanning-Tree

MST is a standard published by the IEEE to create different STP instances for groups of VLANs to have more than one STP topology approaching the Cisco mechanisms ...
Read more 0
Enterprise Infrastructure

STP: Rapid PVST+ configuration

The iEEE 802.1w standard was developed using the main concepts of 802.1d (Common Spanning-Tree) but with a faster convergence time. It can be applied to single or multiple ...
Read more 0
Enterprise Infrastructure

STP: Protection Features

Root Guard The Root Guard feature was developed as a means to control when a candidate root bridge switch connects to the network. It records the bridge ID ...
Read more 0
en_US